RAMATECH REEL RACK SYSTEM LA02
The active drum rack
The active LA02 drum rack actively drives the cable drum by means of a rubber wheel drive and thus allows for higher speeds. The mobile drive tower enables fast cable changes.
FEATURES
- All drum frames are customised as part of a modular system
- Different grid widths and frame heights allow various hall dimensions to be covered
- A comprehensive range of accessories is available, such as drum axles, flanges, anti-return device, etc.
- Optimum use of storage and production space
- Maximum flexibility: one drive unit for all reel dimensions
Reel Rack System LA02
PDF 9269 KB
Function and equipment
Reel Rack Systems are available in variable versions and various heights.
RAMATECH REEL RACK SYSTEM LA02
Frames and Sector sizes:
Reel Rack systems are available (as a standard):
Frame heights
2.8 m = Room height in min. 3 m
3.8 m = Room height in min. 4 m
4.8 m = Room height in min. 5 m
Sector sizes (width): 600/800/1000/1200
Special sizes on request
Reel loading
Reel loading from front or backside (has to be defined on time of the order).
Production line with a reel rack system
Installation of the production line depends on production room space.
How to save production space
The cutting/stripping machine with periphals could be installed in a 90 degrees angle.
PRODUCTION DIRECTION
The system will be delivered in standard with production from left to the right. If required we could also offer a special version with production direction from right to the left.
Accessories and Storage Systems
RAMATECH REEL RACK SYSTEM LA02
Bobbin axles and flanges
With the bobbin bearing system, the bobbins are loaded by means of bobbin axles and flanges.
For the bobbin bearing system, we supply you with bobbin axles in various lengths (depending on the grid width) and bobbin flanges (depending on the flange hole diameter).
The holders are also easily adjustable. This means that the operator can also adjust the height of the bobbins.
Safety
The reel axle holders are equipped with a reel safety support. The reels are fixed and could not fall out of the reel rack system.
Drive system
The drive system could be moved sideways.
Pneum. Storage arm
The most commonly used storage system. This storage system is available for cables up to 35 mm.
Pneum. linear storage system
The linear storage system is suitable for flexible cables up to max.18-20 mm.
Reel Rack Systems in Production
Ramatech Reel Rack Systems are successfully integrated into production lines. Ramatech peripherals or cutting and stripping machines could be connected very easy.
Reel loading with Forklift adapter
Professional reel loading with RAMA forklift adapter